HSKALNI10xxxyyy - 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks - High heat transfer rate, High thermal conductivity Aluminium Nitride heat sinks and stand offs manufactured by US Microwaves HSKALNI10xxxyyy,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers HSKALNI10xxxyyy - 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks - High heat transfer rate, High thermal conductivity Aluminium Nitride heat sinks and stand offs manufactured by US Microwaves HSKALNI10xxxyyy,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers US MICROWAVES 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks Advanced Microwave Components HSKALNI10xxxyyy FEATURES APPLICATIONS AlN Isolated Heat Sink High heat transfer rate High thermal conductivity Very good thermal contact Very good thermal shock resistance Microwave hybrid circuits Mount for GaAs microwave active devices Solid state RF power amplifiers 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10xxxyyy HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE The HSKALNI10xxxyyy series of microwave 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks is designed to be used in microwave hybrid circuits. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% visual inspected and packaged in waffle packs. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink ELECTRICAL/MECHANICAL CHARACTERISTICS LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS - - Thickness T 10 mils 10 10 Thermal Resistance Rth 2.32E-02 K/W Power dissipation (ΔT=1°C) P 31 W DC Resistance DCR ∞ Ω 20 10 Thermal Resistance Rth 1.16E-02 K/W Power dissipation (ΔT=1°C) P 61 W DC Resistance DCR ∞ Ω 30 10 Thermal Resistance Rth 7.72E-03 K/W Power dissipation (ΔT=1°C) P 92 W DC Resistance DCR ∞ Ω 20 20 Thermal Resistance Rth 5.79E-03 K/W Power dissipation (ΔT=1°C) P 122 W DC Resistance DCR ∞ Ω 40 20 Thermal Resistance Rth 2.89E-03 K/W Power dissipation (ΔT=1°C) P 244 W DC Resistance DCR ∞ Ω 60 20 Thermal Resistance Rth 1.93E-03 K/W Power dissipation (ΔT=1°C) P 366 W DC Resistance DCR ∞ Ω 30 30 Thermal Resistance Rth 2.57E-03 K/W Power dissipation (ΔT=1°C) P 275 W DC Resistance DCR ∞ Ω 60 30 Thermal Resistance Rth 1.29E-03 K/W Power dissipation (ΔT=1°C) P 550 W DC Resistance DCR ∞ Ω 120 30 Thermal Resistance Rth 6.43E-04 K/W Power dissipation (ΔT=1°C) P 1099 W DC Resistance DCR ∞ Ω 40 40 Thermal Resistance Rth 1.45E-03 K/W Power dissipation (ΔT=1°C) P 489 W DC Resistance DCR ∞ Ω 80 40 Thermal Resistance Rth 7.24E-04 K/W Power dissipation (ΔT=1°C) P 977 W DC Resistance DCR ∞ Ω 120 40 Thermal Resistance Rth 4.82E-04 K/W Power dissipation (ΔT=1°C) P 1466 W DC Resistance DCR ∞ Ω 160 40 Thermal Resistance Rth 3.62E-04 K/W Power dissipation (ΔT=1°C) P 1954 W DC Resistance DCR ∞ Ω ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] AlN Aluminium Nitride 10±0.5 L x W ±2 Frontside metal Backside metal The front side metallization is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Custom metallization is available for special orders. The backside metallization is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Custom metallization is available for special orders. 10x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10010010 20x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10020010 30x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10030010 20x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10020020 40x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10040020 60x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10060020 30x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10030030 60x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10060030 120x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10120030 40x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10040040 80x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10080040 120x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10120040 160x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10160040 All US Microwaves Aluminium Nitride Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). Aluminium Nitride Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION 10 mills Aluminium Nitride Isolated Heat Sink STANDARD PRODUCTS PRICE LIST LENGTH [mils] WIDTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 10 10 HSKALNI10010010 -WP 241 $1.328 20 10 HSKALNI10020010 -WP 220 $1.455 30 10 HSKALNI10030010 -WP 203 $1.576 20 20 HSKALNI10020020 -WP 196 $1.633 40 20 HSKALNI10040020 -WP 161 $1.988 60 20 HSKALNI10060020 -WP 137 $2.336 30 30 HSKALNI10030030 -WP 157 $2.038 60 30 HSKALNI10060030 -WP 118 $2.712 120 30 HSKALNI10120030 -WP 79 $4.051 40 40 HSKALNI10040040 -WP 126 $2.54 80 40 HSKALNI10080040 -WP 88 $3.636 120 40 HSKALNI10120040 -WP 67 $4.776 160 40 HSKALNI10160040 -WP 55 $5.818 HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Aluminium Nitride Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for Aluminium Nitride Isolated Heat Sink products packaged in waffle packs is 2-4 weeks ARO. For Aluminium Nitride Isolated Heat Sink Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All Aluminium Nitride Isolated Heat Sink devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, Aluminium Nitride Isolated Heat Sink devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of Aluminium Nitride Isolated Heat Sink are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all Aluminium Nitride Isolated Heat Sink standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.

 
 
US MICROWAVES   10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks
Advanced Microwave Components   HSKALNI10xxxyyy
 
 

FEATURES
APPLICATIONS
AlN Isolated Heat Sink
High heat transfer rate
High thermal conductivity
Very good thermal contact
Very good thermal shock resistance
Microwave hybrid circuits
Mount for GaAs microwave active devices
Solid state RF power amplifiers
 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10xxxyyy

HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
The HSKALNI10xxxyyy series of microwave 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks is designed to be used in microwave hybrid circuits. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% visual inspected and packaged in waffle packs.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink
ELECTRICAL/MECHANICAL CHARACTERISTICS
LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS
- - Thickness T 10 mils
10 10 Thermal Resistance Rth 2.32E-02 K/W
Power dissipation (ΔT=1°C) P 31 W
DC Resistance DCR ∞ Ω
20 10 Thermal Resistance Rth 1.16E-02 K/W
Power dissipation (ΔT=1°C) P 61 W
DC Resistance DCR ∞ Ω
30 10 Thermal Resistance Rth 7.72E-03 K/W
Power dissipation (ΔT=1°C) P 92 W
DC Resistance DCR ∞ Ω
20 20 Thermal Resistance Rth 5.79E-03 K/W
Power dissipation (ΔT=1°C) P 122 W
DC Resistance DCR ∞ Ω
40 20 Thermal Resistance Rth 2.89E-03 K/W
Power dissipation (ΔT=1°C) P 244 W
DC Resistance DCR ∞ Ω
60 20 Thermal Resistance Rth 1.93E-03 K/W
Power dissipation (ΔT=1°C) P 366 W
DC Resistance DCR ∞ Ω
30 30 Thermal Resistance Rth 2.57E-03 K/W
Power dissipation (ΔT=1°C) P 275 W
DC Resistance DCR ∞ Ω
60 30 Thermal Resistance Rth 1.29E-03 K/W
Power dissipation (ΔT=1°C) P 550 W
DC Resistance DCR ∞ Ω
120 30 Thermal Resistance Rth 6.43E-04 K/W
Power dissipation (ΔT=1°C) P 1099 W
DC Resistance DCR ∞ Ω
40 40 Thermal Resistance Rth 1.45E-03 K/W
Power dissipation (ΔT=1°C) P 489 W
DC Resistance DCR ∞ Ω
80 40 Thermal Resistance Rth 7.24E-04 K/W
Power dissipation (ΔT=1°C) P 977 W
DC Resistance DCR ∞ Ω
120 40 Thermal Resistance Rth 4.82E-04 K/W
Power dissipation (ΔT=1°C) P 1466 W
DC Resistance DCR ∞ Ω
160 40 Thermal Resistance Rth 3.62E-04 K/W
Power dissipation (ΔT=1°C) P 1954 W
DC Resistance DCR ∞ Ω
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink
GENERAL DIE INFORMATION
Substrate Thickness [mils] Size [mils]
AlN Aluminium Nitride 10±0.5 L x W ±2
Frontside metal Backside metal
The front side metallization is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Custom metallization is available for special orders. The backside metallization is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Custom metallization is available for special orders.
10x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10010010
20x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10020010
30x10 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10030010
20x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10020020
40x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10040020
60x20 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10060020
30x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10030030
60x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10060030
120x30 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10120030
40x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10040040
80x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10080040
120x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10120040
160x40 mils, 10 mils thick gold coated thin film Aluminium Nitride Isolated heat sinks HSKALNI10160040
All US Microwaves Aluminium Nitride Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

Aluminium Nitride Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION

10 mills Aluminium Nitride Isolated Heat Sink STANDARD PRODUCTS PRICE LIST
LENGTH
[mils]		 WIDTH
[mils]		 US MICROWAVES
PART NUMBER		 WAFFLE
PACKS		 MINIM ORDER
QTY		 U/P
[$]
10 10 HSKALNI10010010 -WP 241 $1.328
20 10 HSKALNI10020010 -WP 220 $1.455
30 10 HSKALNI10030010 -WP 203 $1.576
20 20 HSKALNI10020020 -WP 196 $1.633
40 20 HSKALNI10040020 -WP 161 $1.988
60 20 HSKALNI10060020 -WP 137 $2.336
30 30 HSKALNI10030030 -WP 157 $2.038
60 30 HSKALNI10060030 -WP 118 $2.712
120 30 HSKALNI10120030 -WP 79 $4.051
40 40 HSKALNI10040040 -WP 126 $2.54
80 40 HSKALNI10080040 -WP 88 $3.636
120 40 HSKALNI10120040 -WP 67 $4.776
160 40 HSKALNI10160040 -WP 55 $5.818
HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink: List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

HSKALNI10xxxyyy Aluminium Nitride Isolated Heat Sink INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: Aluminium Nitride Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for Aluminium Nitride Isolated Heat Sink products packaged in waffle packs is 2-4 weeks ARO. For Aluminium Nitride Isolated Heat Sink Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All Aluminium Nitride Isolated Heat Sink devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, Aluminium Nitride Isolated Heat Sink devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of Aluminium Nitride Isolated Heat Sink are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all Aluminium Nitride Isolated Heat Sink standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.

Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

Last updated: July 06, 2009
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2026 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.