HSKSII05xxxyyy Silicon thermal management, therma plane, Laser diode submounts Si - 5 mils thick gold coated thin film Silicon Isolated heat sinks - High heat transfer rate, High thermal conductivity Silicon heat sinks and stand offs manufactured by US Microwaves HSKSII05xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers HSKSII05xxxyyy Silicon thermal management, therma plane, Laser diode submounts Si - 5 mils thick gold coated thin film Silicon Isolated heat sinks - High heat transfer rate, High thermal conductivity Silicon heat sinks and stand offs manufactured by US Microwaves HSKSII05xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers US MICROWAVES 5 mils thick gold coated thin film Silicon Isolated heat sinks Advanced Microwave Components HSKSII05xxxyyy FEATURES APPLICATIONS Si Isolated Heat Sink High heat transfer rate High thermal conductivity Very good thermal contact Very good thermal shock resistance Microwave hybrid circuits Mount for GaAs microwave active devices Solid state RF power amplifiers 5 mils thick gold coated thin film Silicon Isolated heat sinks HSKSII05xxxyyy HSKSII05xxxyyy Silicon Isolated Heat Sink PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE The HSKSII05xxxyyy series of microwave 5 mils thick gold coated thin film Silicon Isolated heat sinks TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING HSKSII05xxxyyy Silicon Isolated Heat Sink ELECTRICAL/MECHANICAL CHARACTERISTICS LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS - - Thickness T 5 mils 10 10 Thermal Resistance Rth 13.12 K/W Thermal Conductivity k 7.62E-02 W/K Capacitance C 0.054 pF 20 10 Thermal Resistance Rth 6.56 K/W Thermal Conductivity k 1.52E-01 W/K Capacitance C 0.108 pF 30 10 Thermal Resistance Rth 4.37 K/W Thermal Conductivity k 2.29E-01 W/K Capacitance C 0.162 pF 20 20 Thermal Resistance Rth 3.28 K/W Thermal Conductivity k 3.05E-01 W/K Capacitance C 0.216 pF 40 20 Thermal Resistance Rth 1.64 K/W Thermal Conductivity k 6.10E-01 W/K Capacitance C 0.432 pF 60 20 Thermal Resistance Rth 1.09 K/W Thermal Conductivity k 9.17E-01 W/K Capacitance C 0.648 pF 30 30 Thermal Resistance Rth 1.46 K/W Thermal Conductivity k 6.85E-01 W/K Capacitance C 0.486 pF 60 30 Thermal Resistance Rth 0.73 K/W Thermal Conductivity k 1.37E+00 W/K Capacitance C 0.972 pF 120 30 Thermal Resistance Rth 0.36 K/W Thermal Conductivity k 2.78E+00 W/K Capacitance C 1.943 pF 40 40 Thermal Resistance Rth 0.82 K/W Thermal Conductivity k 1.22E+00 W/K Capacitance C 0.864 pF 80 40 Thermal Resistance Rth 0.41 K/W Thermal Conductivity k 2.44E+00 W/K Capacitance C 1.727 pF 120 40 Thermal Resistance Rth 0.27 K/W Thermal Conductivity k 3.70E+00 W/K Capacitance C 2.591 pF 160 40 Thermal Resistance Rth 0.21 K/W Thermal Conductivity k 4.76E+00 W/K Capacitance C 3.454 pF 50 50 Thermal Resistance Rth 0.52 K/W Thermal Conductivity k 1.92E+00 W/K Capacitance C 1.349 pF 80 50 Thermal Resistance Rth 0.33 K/W Thermal Conductivity k 3.03E+00 W/K Capacitance C 2.159 pF 100 50 Thermal Resistance Rth 0.26 K/W Thermal Conductivity k 3.85E+00 W/K Capacitance C 2.699 pF 120 60 Thermal Resistance Rth 0.18 K/W Thermal Conductivity k 5.56E+00 W/K Capacitance C 3.886 pF 200 100 Thermal Resistance Rth 0.07 K/W Thermal Conductivity k 1.43E+01 W/K Capacitance C 10.795 pF 180 120 Thermal Resistance Rth 0.06 K/W Thermal Conductivity k 1.67E+01 W/K Capacitance C 11.659 pF 240 120 Thermal Resistance Rth 0.05 K/W Thermal Conductivity k 2.00E+01 W/K Capacitance C 15.545 pF 250 120 Thermal Resistance Rth 0.04 K/W Thermal Conductivity k 2.50E+01 W/K Capacitance C 16.193 pF 290 170 Thermal Resistance Rth 0.03 K/W Thermal Conductivity k 3.33E+01 W/K Capacitance C 26.61 pF 230 180 Thermal Resistance Rth 0.03 K/W Thermal Conductivity k 3.33E+01 W/K Capacitance C 22.346 pF 220 250 Thermal Resistance Rth 0.02 K/W Thermal Conductivity k 5.00E+01 W/K Capacitance C 29.686 pF 250 250 Thermal Resistance Rth 0.02 K/W Thermal Conductivity k 5.00E+01 W/K Capacitance C 33.734 pF 370 250 Thermal Resistance Rth 0.01 K/W Thermal Conductivity k 1.00E+02 W/K Capacitance C 49.927 pF ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. HSKSII05xxxyyy Silicon Isolated Heat Sink GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Case style Si [Silicon] 5±0.5 xxxxyyy±2 Frontside metal Backside metal The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. L x W mils, 5 mils thick gold coated thin film Silicon Isolated heat sinks HSKSII05xxxyyy All US Microwaves Silicon Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). Silicon Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION 5 mils Silicon Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au] LENGTH [mils] WIDTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] ORDER RFQ 10 10 HSKSII05010010-BD0 -WP 241 $1.328 ORDER 20 10 HSKSII05020010-BD0 -WP 220 $1.455 ORDER 30 10 HSKSII05030010-BD0 -WP 203 $1.576 ORDER 20 20 HSKSII05020020-BD0 -WP 196 $1.633 ORDER 40 20 HSKSII05040020-BD0 -WP 161 $1.988 ORDER 60 20 HSKSII05060020-BD0 -WP 137 $2.336 ORDER 30 30 HSKSII05030030-BD0 -WP 157 $2.038 ORDER 60 30 HSKSII05060030-BD0 -WP 118 $2.712 ORDER 120 30 HSKSII05120030-BD0 -WP 79 $4.051 ORDER 40 40 HSKSII05040040-BD0 -WP 126 $2.540 ORDER 80 40 HSKSII05080040-BD0 -WP 88 $3.636 ORDER 120 40 HSKSII05120040-BD0 -WP 67 $4.776 ORDER 160 40 HSKSII05160040-BD0 -WP 55 $5.818 ORDER 50 50 HSKSII05050050-BD0 -WP RFQ 80 50 HSKSII05080050-BD0 -WP RFQ 100 50 HSKSII05100050-BD0 -WP RFQ 120 60 HSKSII05120060-BD0 -WP RFQ 200 100 HSKSII05200100-BD0 -WP RFQ 180 120 HSKSII05180120-BD0 -WP RFQ 240 120 HSKSII05240120-BD0 -WP RFQ 250 120 HSKSII05250120-BD0 -WP RFQ 290 170 HSKSII05290170-BD0 -WP RFQ 230 180 HSKSII05230180-BD0 -WP RFQ 220 250 HSKSII05220250-BD0 -WP RFQ 250 250 HSKSII05250250-BD0 -WP RFQ 370 250 HSKSII05370250-BD0 -WP RFQ HSKSII05xxxyyy Silicon Isolated Heat Sink: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. HSKSII05xxxyyy Silicon Isolated Heat Sink INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Silicon Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 5 mils thick gold coated thin film Silicon Isolated heat sinks Si SHIPPING/PACKAGING: All 5 mils thick gold coated thin film Silicon Isolated heat sinks SAMPLES: Samples of 5 mils thick gold coated thin film Silicon Isolated heat sinks GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 5 mils thick gold coated thin film Silicon Isolated heat sinks standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

 
 
US MICROWAVES   5 mils thick gold coated thin film Silicon Isolated heat sinks
Advanced Microwave Components   HSKSII05xxxyyy
 
 

FEATURES
APPLICATIONS
Si Isolated Heat Sink
High heat transfer rate
High thermal conductivity
Very good thermal contact
Very good thermal shock resistance
Microwave hybrid circuits
Mount for GaAs microwave active devices
Solid state RF power amplifiers
5 mils thick gold coated thin film Silicon Isolated  heat sinks HSKSII05xxxyyy

HSKSII05xxxyyy Silicon Isolated Heat Sink
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
The HSKSII05xxxyyy series of microwave 5 mils thick gold coated thin film Silicon Isolated heat sinks is designed to be used in microwave hybrid circuits. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% visual inspected and packaged in waffle packs.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

HSKSII05xxxyyy Silicon Isolated Heat Sink
ELECTRICAL/MECHANICAL CHARACTERISTICS
LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS
- - Thickness T 5 mils
10 10 Thermal Resistance Rth 13.12 K/W
Thermal Conductivity k 7.62E-02 W/K
Capacitance C 0.054 pF
20 10 Thermal Resistance Rth 6.56 K/W
Thermal Conductivity k 1.52E-01 W/K
Capacitance C 0.108 pF
30 10 Thermal Resistance Rth 4.37 K/W
Thermal Conductivity k 2.29E-01 W/K
Capacitance C 0.162 pF
20 20 Thermal Resistance Rth 3.28 K/W
Thermal Conductivity k 3.05E-01 W/K
Capacitance C 0.216 pF
40 20 Thermal Resistance Rth 1.64 K/W
Thermal Conductivity k 6.10E-01 W/K
Capacitance C 0.432 pF
60 20 Thermal Resistance Rth 1.09 K/W
Thermal Conductivity k 9.17E-01 W/K
Capacitance C 0.648 pF
30 30 Thermal Resistance Rth 1.46 K/W
Thermal Conductivity k 6.85E-01 W/K
Capacitance C 0.486 pF
60 30 Thermal Resistance Rth 0.73 K/W
Thermal Conductivity k 1.37E+00 W/K
Capacitance C 0.972 pF
120 30 Thermal Resistance Rth 0.36 K/W
Thermal Conductivity k 2.78E+00 W/K
Capacitance C 1.943 pF
40 40 Thermal Resistance Rth 0.82 K/W
Thermal Conductivity k 1.22E+00 W/K
Capacitance C 0.864 pF
80 40 Thermal Resistance Rth 0.41 K/W
Thermal Conductivity k 2.44E+00 W/K
Capacitance C 1.727 pF
120 40 Thermal Resistance Rth 0.27 K/W
Thermal Conductivity k 3.70E+00 W/K
Capacitance C 2.591 pF
160 40 Thermal Resistance Rth 0.21 K/W
Thermal Conductivity k 4.76E+00 W/K
Capacitance C 3.454 pF
50 50 Thermal Resistance Rth 0.52 K/W
Thermal Conductivity k 1.92E+00 W/K
Capacitance C 1.349 pF
80 50 Thermal Resistance Rth 0.33 K/W
Thermal Conductivity k 3.03E+00 W/K
Capacitance C 2.159 pF
100 50 Thermal Resistance Rth 0.26 K/W
Thermal Conductivity k 3.85E+00 W/K
Capacitance C 2.699 pF
120 60 Thermal Resistance Rth 0.18 K/W
Thermal Conductivity k 5.56E+00 W/K
Capacitance C 3.886 pF
200 100 Thermal Resistance Rth 0.07 K/W
Thermal Conductivity k 1.43E+01 W/K
Capacitance C 10.795 pF
180 120 Thermal Resistance Rth 0.06 K/W
Thermal Conductivity k 1.67E+01 W/K
Capacitance C 11.659 pF
240 120 Thermal Resistance Rth 0.05 K/W
Thermal Conductivity k 2.00E+01 W/K
Capacitance C 15.545 pF
250 120 Thermal Resistance Rth 0.04 K/W
Thermal Conductivity k 2.50E+01 W/K
Capacitance C 16.193 pF
290 170 Thermal Resistance Rth 0.03 K/W
Thermal Conductivity k 3.33E+01 W/K
Capacitance C 26.61 pF
230 180 Thermal Resistance Rth 0.03 K/W
Thermal Conductivity k 3.33E+01 W/K
Capacitance C 22.346 pF
220 250 Thermal Resistance Rth 0.02 K/W
Thermal Conductivity k 5.00E+01 W/K
Capacitance C 29.686 pF
250 250 Thermal Resistance Rth 0.02 K/W
Thermal Conductivity k 5.00E+01 W/K
Capacitance C 33.734 pF
370 250 Thermal Resistance Rth 0.01 K/W
Thermal Conductivity k 1.00E+02 W/K
Capacitance C 49.927 pF
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

HSKSII05xxxyyy Silicon Isolated Heat Sink
GENERAL DIE INFORMATION
Substrate Thickness [mils] Size [mils] Case style
Si [Silicon] 5±0.5 xxxxyyy±2  
Frontside metal Backside metal
The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders.
L x W mils, 5 mils thick gold coated thin film Silicon Isolated  heat sinks HSKSII05xxxyyy
All US Microwaves Silicon Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

Silicon Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION

5 mils Silicon Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au]
LENGTH
[mils]
WIDTH
[mils]
US MICROWAVES
PART NUMBER
WAFFLE
PACKS
MINIM ORDER
QTY
U/P
[$]
ORDER
RFQ
10 10 HSKSII05010010-BD0 -WP 241 $1.328 ORDER
20 10 HSKSII05020010-BD0 -WP 220 $1.455 ORDER
30 10 HSKSII05030010-BD0 -WP 203 $1.576 ORDER
20 20 HSKSII05020020-BD0 -WP 196 $1.633 ORDER
40 20 HSKSII05040020-BD0 -WP 161 $1.988 ORDER
60 20 HSKSII05060020-BD0 -WP 137 $2.336 ORDER
30 30 HSKSII05030030-BD0 -WP 157 $2.038 ORDER
60 30 HSKSII05060030-BD0 -WP 118 $2.712 ORDER
120 30 HSKSII05120030-BD0 -WP 79 $4.051 ORDER
40 40 HSKSII05040040-BD0 -WP 126 $2.540 ORDER
80 40 HSKSII05080040-BD0 -WP 88 $3.636 ORDER
120 40 HSKSII05120040-BD0 -WP 67 $4.776 ORDER
160 40 HSKSII05160040-BD0 -WP 55 $5.818 ORDER
50 50 HSKSII05050050-BD0 -WP     RFQ
80 50 HSKSII05080050-BD0 -WP     RFQ
100 50 HSKSII05100050-BD0 -WP     RFQ
120 60 HSKSII05120060-BD0 -WP     RFQ
200 100 HSKSII05200100-BD0 -WP     RFQ
180 120 HSKSII05180120-BD0 -WP     RFQ
240 120 HSKSII05240120-BD0 -WP     RFQ
250 120 HSKSII05250120-BD0 -WP     RFQ
290 170 HSKSII05290170-BD0 -WP     RFQ
230 180 HSKSII05230180-BD0 -WP     RFQ
220 250 HSKSII05220250-BD0 -WP     RFQ
250 250 HSKSII05250250-BD0 -WP     RFQ
370 250 HSKSII05370250-BD0 -WP     RFQ
HSKSII05xxxyyy Silicon Isolated Heat Sink: List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

STANDARD PRODUCTS AVAILABLE FROM STOCK - ORDERING INFORMATION
USM P/NMIN QTYU/PORDER/RFQSTOCK QTYU/PORDER/RFQ
No part available from stock

HSKSII05xxxyyy Silicon Isolated Heat Sink INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: Silicon Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 5 mils thick gold coated thin film Silicon Isolated heat sinks Si products packaged in waffle packs is 2-4 weeks ARO. For custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 5 mils thick gold coated thin film Silicon Isolated heat sinks devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, heat sink devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 5 mils thick gold coated thin film Silicon Isolated heat sinks are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 5 mils thick gold coated thin film Silicon Isolated heat sinks standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.


Last updated: September 24, 2010
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2024 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.