HSKSII15xxxyyy Silicon thermal management, therma plane, Laser diode submounts Si - 15 mils thick gold coated thin film Silicon Isolated heat sinks - High heat transfer rate, High thermal conductivity Silicon heat sinks and stand offs manufactured by US Microwaves

HSKSII15xxxyyy Silicon thermal management, therma plane, Laser diode submounts Si - 15 mils thick gold coated thin film Silicon Isolated heat sinks - High heat transfer rate, High thermal conductivity Silicon heat sinks and stand offs manufactured by US Microwaves HSKSII15xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers HSKSII15xxxyyy Silicon thermal management, therma plane, Laser diode submounts Si - 15 mils thick gold coated thin film Silicon Isolated heat sinks - High heat transfer rate, High thermal conductivity Silicon heat sinks and stand offs manufactured by US Microwaves HSKSII15xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers US MICROWAVES 15 mils thick gold coated thin film Silicon Isolated heat sinks Advanced Microwave Components HSKSII15xxxyyy FEATURES APPLICATIONS Si Isolated Heat Sink High heat transfer rate High thermal conductivity Very good thermal contact Very good thermal shock resistance Microwave hybrid circuits Mount for GaAs microwave active devices Solid state RF power amplifiers 15 mils thick gold coated thin film Silicon Isolated heat sinks HSKSII15xxxyyy HSKSII15xxxyyy Silicon Isolated Heat Sink PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE The HSKSII15xxxyyy series of microwave 15 mils thick gold coated thin film Silicon Isolated heat sinks TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING HSKSII15xxxyyy Silicon Isolated Heat Sink ELECTRICAL/MECHANICAL CHARACTERISTICS LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS - - Thickness T 15 mils 10 10 Thermal Resistance Rth 39.37 K/W Thermal Conductivity k 2.54E-02 W/K Capacitance C 0.018 pF 20 10 Thermal Resistance Rth 19.69 K/W Thermal Conductivity k 5.08E-02 W/K Capacitance C 0.036 pF 30 10 Thermal Resistance Rth 13.12 K/W Thermal Conductivity k 7.62E-02 W/K Capacitance C 0.054 pF 20 20 Thermal Resistance Rth 9.84 K/W Thermal Conductivity k 1.02E-01 W/K Capacitance C 0.072 pF 40 20 Thermal Resistance Rth 4.92 K/W Thermal Conductivity k 2.03E-01 W/K Capacitance C 0.144 pF 60 20 Thermal Resistance Rth 3.28 K/W Thermal Conductivity k 3.05E-01 W/K Capacitance C 0.216 pF 30 30 Thermal Resistance Rth 4.37 K/W Thermal Conductivity k 2.29E-01 W/K Capacitance C 0.162 pF 60 30 Thermal Resistance Rth 2.19 K/W Thermal Conductivity k 4.57E-01 W/K Capacitance C 0.324 pF 120 30 Thermal Resistance Rth 1.09 K/W Thermal Conductivity k 9.17E-01 W/K Capacitance C 0.648 pF 40 40 Thermal Resistance Rth 2.46 K/W Thermal Conductivity k 4.07E-01 W/K Capacitance C 0.288 pF 80 40 Thermal Resistance Rth 1.23 K/W Thermal Conductivity k 8.13E-01 W/K Capacitance C 0.576 pF 120 40 Thermal Resistance Rth 0.82 K/W Thermal Conductivity k 1.22E+00 W/K Capacitance C 0.864 pF 160 40 Thermal Resistance Rth 0.62 K/W Thermal Conductivity k 1.61E+00 W/K Capacitance C 1.151 pF 50 50 Thermal Resistance Rth 1.57 K/W Thermal Conductivity k 6.37E-01 W/K Capacitance C 0.45 pF 80 50 Thermal Resistance Rth 0.98 K/W Thermal Conductivity k 1.02E+00 W/K Capacitance C 0.72 pF 100 50 Thermal Resistance Rth 0.79 K/W Thermal Conductivity k 1.27E+00 W/K Capacitance C 0.9 pF 120 60 Thermal Resistance Rth 0.55 K/W Thermal Conductivity k 1.82E+00 W/K Capacitance C 1.295 pF 200 100 Thermal Resistance Rth 0.2 K/W Thermal Conductivity k 5.00E+00 W/K Capacitance C 3.598 pF 180 120 Thermal Resistance Rth 0.18 K/W Thermal Conductivity k 5.56E+00 W/K Capacitance C 3.886 pF 240 120 Thermal Resistance Rth 0.14 K/W Thermal Conductivity k 7.14E+00 W/K Capacitance C 5.182 pF 250 120 Thermal Resistance Rth 0.13 K/W Thermal Conductivity k 7.69E+00 W/K Capacitance C 5.398 pF 290 170 Thermal Resistance Rth 0.08 K/W Thermal Conductivity k 1.25E+01 W/K Capacitance C 8.87 pF 230 180 Thermal Resistance Rth 0.1 K/W Thermal Conductivity k 1.00E+01 W/K Capacitance C 7.449 pF 220 250 Thermal Resistance Rth 0.07 K/W Thermal Conductivity k 1.43E+01 W/K Capacitance C 9.895 pF 250 250 Thermal Resistance Rth 0.06 K/W Thermal Conductivity k 1.67E+01 W/K Capacitance C 11.245 pF 370 250 Thermal Resistance Rth 0.04 K/W Thermal Conductivity k 2.50E+01 W/K Capacitance C 16.642 pF ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. HSKSII15xxxyyy Silicon Isolated Heat Sink GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Case style Si [Silicon] 15±0.5 xxxxyyy±2 Frontside metal Backside metal The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. L x W mils, 15 mils thick gold coated thin film Silicon Isolated heat sinks HSKSII15xxxyyy All US Microwaves Silicon Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). Silicon Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION 15 mils Silicon Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au] LENGTH [mils] WIDTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] ORDER RFQ 10 10 HSKSII15010010-BD0 -WP 241 $1.328 ORDER 20 10 HSKSII15020010-BD0 -WP 220 $1.455 ORDER 30 10 HSKSII15030010-BD0 -WP 203 $1.576 ORDER 20 20 HSKSII15020020-BD0 -WP 196 $1.633 ORDER 40 20 HSKSII15040020-BD0 -WP 161 $1.988 ORDER 60 20 HSKSII15060020-BD0 -WP 137 $2.336 ORDER 30 30 HSKSII15030030-BD0 -WP 157 $2.038 ORDER 60 30 HSKSII15060030-BD0 -WP 118 $2.712 ORDER 120 30 HSKSII15120030-BD0 -WP 79 $4.051 ORDER 40 40 HSKSII15040040-BD0 -WP 126 $2.540 ORDER 80 40 HSKSII15080040-BD0 -WP 88 $3.636 ORDER 120 40 HSKSII15120040-BD0 -WP 67 $4.776 ORDER 160 40 HSKSII15160040-BD0 -WP 55 $5.818 ORDER 50 50 HSKSII15050050-BD0 -WP RFQ 80 50 HSKSII15080050-BD0 -WP RFQ 100 50 HSKSII15100050-BD0 -WP RFQ 120 60 HSKSII15120060-BD0 -WP RFQ 200 100 HSKSII15200100-BD0 -WP RFQ 180 120 HSKSII15180120-BD0 -WP RFQ 240 120 HSKSII15240120-BD0 -WP RFQ 250 120 HSKSII15250120-BD0 -WP RFQ 290 170 HSKSII15290170-BD0 -WP RFQ 230 180 HSKSII15230180-BD0 -WP RFQ 220 250 HSKSII15220250-BD0 -WP RFQ 250 250 HSKSII15250250-BD0 -WP RFQ 370 250 HSKSII15370250-BD0 -WP RFQ HSKSII15xxxyyy Silicon Isolated Heat Sink: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. HSKSII15xxxyyy Silicon Isolated Heat Sink INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Silicon Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 15 mils thick gold coated thin film Silicon Isolated heat sinks Si SHIPPING/PACKAGING: All 15 mils thick gold coated thin film Silicon Isolated heat sinks SAMPLES: Samples of 15 mils thick gold coated thin film Silicon Isolated heat sinks GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 15 mils thick gold coated thin film Silicon Isolated heat sinks standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales



US MICROWAVES		15 mils thick gold coated thin film Silicon Isolated heat sinks
Advanced Microwave Components		HSKSII15xxxyyy

FEATURES

APPLICATIONS

Si Isolated Heat Sink

High heat transfer rate

High thermal conductivity

Very good thermal contact

Very good thermal shock resistance

Microwave hybrid circuits

Mount for GaAs microwave active devices

Solid state RF power amplifiers

15 mils thick gold coated thin film Silicon Isolated heat sinks HSKSII15xxxyyy

HSKSII15xxxyyy Silicon Isolated Heat Sink

PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE

The HSKSII15xxxyyy series of microwave 15 mils thick gold coated thin film Silicon Isolated heat sinks is designed to be used in microwave hybrid circuits. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% visual inspected and packaged in waffle packs.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING

All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

HSKSII15xxxyyy Silicon Isolated Heat Sink
ELECTRICAL/MECHANICAL CHARACTERISTICS
LENGTH [mils]	WIDTH [mils]	PARAMETER	SYMBOL	VALUE	UNITS
-	-	Thickness	T	15	mils
10	10	Thermal Resistance	Rth	39.37	K/W
		Thermal Conductivity	k	2.54E-02	W/K
		Capacitance	C	0.018	pF
20	10	Thermal Resistance	Rth	19.69	K/W
		Thermal Conductivity	k	5.08E-02	W/K
		Capacitance	C	0.036	pF
30	10	Thermal Resistance	Rth	13.12	K/W
		Thermal Conductivity	k	7.62E-02	W/K
		Capacitance	C	0.054	pF
20	20	Thermal Resistance	Rth	9.84	K/W
		Thermal Conductivity	k	1.02E-01	W/K
		Capacitance	C	0.072	pF
40	20	Thermal Resistance	Rth	4.92	K/W
		Thermal Conductivity	k	2.03E-01	W/K
		Capacitance	C	0.144	pF
60	20	Thermal Resistance	Rth	3.28	K/W
		Thermal Conductivity	k	3.05E-01	W/K
		Capacitance	C	0.216	pF
30	30	Thermal Resistance	Rth	4.37	K/W
		Thermal Conductivity	k	2.29E-01	W/K
		Capacitance	C	0.162	pF
60	30	Thermal Resistance	Rth	2.19	K/W
		Thermal Conductivity	k	4.57E-01	W/K
		Capacitance	C	0.324	pF
120	30	Thermal Resistance	Rth	1.09	K/W
		Thermal Conductivity	k	9.17E-01	W/K
		Capacitance	C	0.648	pF
40	40	Thermal Resistance	Rth	2.46	K/W
		Thermal Conductivity	k	4.07E-01	W/K
		Capacitance	C	0.288	pF
80	40	Thermal Resistance	Rth	1.23	K/W
		Thermal Conductivity	k	8.13E-01	W/K
		Capacitance	C	0.576	pF
120	40	Thermal Resistance	Rth	0.82	K/W
		Thermal Conductivity	k	1.22E+00	W/K
		Capacitance	C	0.864	pF
160	40	Thermal Resistance	Rth	0.62	K/W
		Thermal Conductivity	k	1.61E+00	W/K
		Capacitance	C	1.151	pF
50	50	Thermal Resistance	Rth	1.57	K/W
		Thermal Conductivity	k	6.37E-01	W/K
		Capacitance	C	0.45	pF
80	50	Thermal Resistance	Rth	0.98	K/W
		Thermal Conductivity	k	1.02E+00	W/K
		Capacitance	C	0.72	pF
100	50	Thermal Resistance	Rth	0.79	K/W
		Thermal Conductivity	k	1.27E+00	W/K
		Capacitance	C	0.9	pF
120	60	Thermal Resistance	Rth	0.55	K/W
		Thermal Conductivity	k	1.82E+00	W/K
		Capacitance	C	1.295	pF
200	100	Thermal Resistance	Rth	0.2	K/W
		Thermal Conductivity	k	5.00E+00	W/K
		Capacitance	C	3.598	pF
180	120	Thermal Resistance	Rth	0.18	K/W
		Thermal Conductivity	k	5.56E+00	W/K
		Capacitance	C	3.886	pF
240	120	Thermal Resistance	Rth	0.14	K/W
		Thermal Conductivity	k	7.14E+00	W/K
		Capacitance	C	5.182	pF
250	120	Thermal Resistance	Rth	0.13	K/W
		Thermal Conductivity	k	7.69E+00	W/K
		Capacitance	C	5.398	pF
290	170	Thermal Resistance	Rth	0.08	K/W
		Thermal Conductivity	k	1.25E+01	W/K
		Capacitance	C	8.87	pF
230	180	Thermal Resistance	Rth	0.1	K/W
		Thermal Conductivity	k	1.00E+01	W/K
		Capacitance	C	7.449	pF
220	250	Thermal Resistance	Rth	0.07	K/W
		Thermal Conductivity	k	1.43E+01	W/K
		Capacitance	C	9.895	pF
250	250	Thermal Resistance	Rth	0.06	K/W
		Thermal Conductivity	k	1.67E+01	W/K
		Capacitance	C	11.245	pF
370	250	Thermal Resistance	Rth	0.04	K/W
		Thermal Conductivity	k	2.50E+01	W/K
		Capacitance	C	16.642	pF
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

HSKSII15xxxyyy Silicon Isolated Heat Sink
GENERAL DIE INFORMATION
Substrate	Thickness [mils]	Size [mils]	Case style
Si [Silicon]	15±0.5	xxxxyyy±2
Frontside metal		Backside metal
The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders.		The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders.

All US Microwaves Silicon Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

Silicon Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION

15 mils Silicon Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au]
LENGTH [mils]	WIDTH [mils]	US MICROWAVES PART NUMBER	WAFFLE PACKS	MINIM ORDER QTY	U/P [$]	ORDER RFQ
10	10	HSKSII15010010-BD0	-WP	241	$1.328	ORDER
20	10	HSKSII15020010-BD0	-WP	220	$1.455	ORDER
30	10	HSKSII15030010-BD0	-WP	203	$1.576	ORDER
20	20	HSKSII15020020-BD0	-WP	196	$1.633	ORDER
40	20	HSKSII15040020-BD0	-WP	161	$1.988	ORDER
60	20	HSKSII15060020-BD0	-WP	137	$2.336	ORDER
30	30	HSKSII15030030-BD0	-WP	157	$2.038	ORDER
60	30	HSKSII15060030-BD0	-WP	118	$2.712	ORDER
120	30	HSKSII15120030-BD0	-WP	79	$4.051	ORDER
40	40	HSKSII15040040-BD0	-WP	126	$2.540	ORDER
80	40	HSKSII15080040-BD0	-WP	88	$3.636	ORDER
120	40	HSKSII15120040-BD0	-WP	67	$4.776	ORDER
160	40	HSKSII15160040-BD0	-WP	55	$5.818	ORDER
50	50	HSKSII15050050-BD0	-WP			RFQ
80	50	HSKSII15080050-BD0	-WP			RFQ
100	50	HSKSII15100050-BD0	-WP			RFQ
120	60	HSKSII15120060-BD0	-WP			RFQ
200	100	HSKSII15200100-BD0	-WP			RFQ
180	120	HSKSII15180120-BD0	-WP			RFQ
240	120	HSKSII15240120-BD0	-WP			RFQ
250	120	HSKSII15250120-BD0	-WP			RFQ
290	170	HSKSII15290170-BD0	-WP			RFQ
230	180	HSKSII15230180-BD0	-WP			RFQ
220	250	HSKSII15220250-BD0	-WP			RFQ
250	250	HSKSII15250250-BD0	-WP			RFQ
370	250	HSKSII15370250-BD0	-WP			RFQ
HSKSII15xxxyyy Silicon Isolated Heat Sink: List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

STANDARD PRODUCTS AVAILABLE FROM STOCK - ORDERING INFORMATION
USM P/N	MIN QTY	U/P	ORDER/RFQ	STOCK QTY	U/P	ORDER/RFQ
No part available from stock

ORDERING: Silicon Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 15 mils thick gold coated thin film Silicon Isolated heat sinks Si products packaged in waffle packs is 2-4 weeks ARO. For custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 15 mils thick gold coated thin film Silicon Isolated heat sinks devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, heat sink devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 15 mils thick gold coated thin film Silicon Isolated heat sinks are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 15 mils thick gold coated thin film Silicon Isolated heat sinks standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.

Last updated: September 24, 2010
US MICROWAVES \| Tel:408-758-8690 Fax: 408-986-8027 \| USMICROWAVES

HSKSII15xxxyyy Silicon Isolated Heat Sink INSTANT QUOTE
US Microwaves P/N	Quantity	E-mail