USMRP10005005AO-5W-1P56GHz 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS Microwave power resistors on Alumina Al2O3 5W 1.56 3dB 50 x 100 mils manufactured by US Microwaves USMRP10005005AO-5W-1P56GHz 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS Microwave power resistors on Alumina Al2O3 5W 1.56 3dB 50 x 100 mils manufactured by US Microwaves US MICROWAVES 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS Advanced Microwave Components USMRP10005005AO-5W-1P56GHz FEATURES APPLICATIONS 1.56GHz Al2O3 POWER CHIP RESISTOR High power dissipation while working up to GHz range frequencies Low insertion loss High reliability and ruggedness Small chip size with reduced stray capacitance per unit area Low temperature coefficient Wide operating temperature range Microwave and RF high power terminations Resistive microwave power dividers Wilkinson power dividers Power attenuators Microwave power amplifiers 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE USMRP10005005AO-5W-1P56GHz, 5W, 1.56GHz, Alumina (Al2O3) flange less power chip resistors are designed to be used in chip and wire hybrid circuits as microwave and RF power resistors, power terminations, Wilkinson power dividers, power attenuators, microwave power amplifiers, etc. Flange less thin film power chip resistors and terminations have low temperature coefficients, low noise and increased long term stability compared to their thick film counterpart (see app note 110). In high power applications, temperature coefficient of resistance and long term stability have to be the best available. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. All US Microwaves products are manufactured using GOLD CHIP TECHNOLOGY™ a trade mark of Semiconix Corporation. ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Resistance range 0.03 - 10000 Ω Maxim Power 5 W Maxim Capacitance 2.044 pF 3dB frequency (defined for 50ohm resistance) 1.56 GHz Temperature Coefficient -55C to 150C 100 ppm/°C Tolerances available 1 % Operating Temperature range -65 to +200 °C Working voltage (Vw) √(P*R) V Peak voltage at 25C, 5 sec 1.5×Vw V Insulation resistance at 25 C 1013 Ω Rth thermal resistance between the resistive layer and the solder joint 1.45 °C/W Note: Power dissipation is provided for a temperature difference of 10°C above ambient between substrate and solder joint. ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Bonding Pads Backside metal Alumina (Al2O3) 5.5±0.5 100x50±2 min 4x4 mils, 3um thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard Ti/Pt/Au compatible with Au-Sn, Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). 1.56GHz Al2O3 POWER CHIP RESISTOR DIE LAYOUT / MECHANICAL SPECIFICATIONS 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz 1.56GHz Al2O3 POWER CHIP RESISTOR CHIP MOUNT 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz power chip resistor mount 1.56GHz Al2O3 POWER CHIP RESISTOR ASSEMBLY PROCESS - SHORT APPLICATION NOTE Flangeless power chip resistors are designed for critical designs where space is at premium. The flangeless power chip resistors can be die attached to the heat sink or to a base plate using AuSn or AuGe preforms. Since the power chip resistors do not have terminals, they have to be attached using gold ribbon via gap welding after the backside is soldered in place. Backside metallization for power chip resistors is Ti/Pt/Au which is also compatible with Sn solder. For the more common SnPb, a Ti/Ni/Au backside metallization should be requested. POWER CHIP RESISTORS - POWER DERATING DIAGRAM 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz Power Derating POWER CHIP RESISTORS S PARAMETERS 5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz RETURN LOSS S-PARAMETERS STANDARD PRODUCTS ORDERING INFORMATION USM P/N WAFFLE PACK R [Ω] MIN. QTY U/P [$] USMRP10005005AO-5W-500-1% -WP 50 606 0.86 PART NUMBER BUILDER R [Ω] R multiplier TOLERANCE PACKAGE Find part # Vmax [V] F@3dB [GHz] STANDARD EIA-24 VALUES - PRODUCTS ORDERING INFORMATION USM P/N R [Ω] QTY U/P[$] USM P/N R [Ω] QTY U/P[$] USMRP10005005AO-5W-1R0 1.0 606 RFQ USMRP10005005AO-5W-101 100.0 606 RFQ USMRP10005005AO-5W-1R1 1.1 606 RFQ USMRP10005005AO-5W-111 110.0 606 RFQ USMRP10005005AO-5W-1R2 1.2 606 RFQ USMRP10005005AO-5W-121 120.0 606 RFQ USMRP10005005AO-5W-1R3 1.3 606 RFQ USMRP10005005AO-5W-131 130.0 606 RFQ USMRP10005005AO-5W-1R5 1.5 606 RFQ USMRP10005005AO-5W-151 150.0 606 RFQ USMRP10005005AO-5W-1R6 1.6 606 RFQ USMRP10005005AO-5W-161 160.0 606 RFQ USMRP10005005AO-5W-1R8 1.8 606 RFQ USMRP10005005AO-5W-181 180.0 606 RFQ USMRP10005005AO-5W-2R0 2.0 606 RFQ USMRP10005005AO-5W-201 200.0 606 RFQ USMRP10005005AO-5W-2R2 2.2 606 RFQ USMRP10005005AO-5W-221 220.0 606 RFQ USMRP10005005AO-5W-2R4 2.4 606 RFQ USMRP10005005AO-5W-241 240.0 606 RFQ USMRP10005005AO-5W-2R7 2.7 606 RFQ USMRP10005005AO-5W-271 270.0 606 RFQ USMRP10005005AO-5W-3R0 3.0 606 RFQ USMRP10005005AO-5W-301 300.0 606 RFQ USMRP10005005AO-5W-3R3 3.3 606 RFQ USMRP10005005AO-5W-331 330.0 606 RFQ USMRP10005005AO-5W-3R6 3.6 606 RFQ USMRP10005005AO-5W-361 360.0 606 RFQ USMRP10005005AO-5W-3R9 3.9 606 RFQ USMRP10005005AO-5W-391 390.0 606 RFQ USMRP10005005AO-5W-4R3 4.3 606 RFQ USMRP10005005AO-5W-431 430.0 606 RFQ USMRP10005005AO-5W-4R7 4.7 606 RFQ USMRP10005005AO-5W-471 470.0 606 RFQ USMRP10005005AO-5W-5R0 5.0 606 RFQ USMRP10005005AO-5W-501 500.0 606 RFQ USMRP10005005AO-5W-5R1 5.1 606 RFQ USMRP10005005AO-5W-511 510.0 606 RFQ USMRP10005005AO-5W-5R6 5.6 606 RFQ USMRP10005005AO-5W-561 560.0 606 RFQ USMRP10005005AO-5W-6R2 6.2 606 RFQ USMRP10005005AO-5W-621 620.0 606 RFQ USMRP10005005AO-5W-6R8 6.8 606 RFQ USMRP10005005AO-5W-681 680.0 606 RFQ USMRP10005005AO-5W-7R5 7.5 606 RFQ USMRP10005005AO-5W-751 750.0 606 RFQ USMRP10005005AO-5W-8R2 8.2 606 RFQ USMRP10005005AO-5W-821 820.0 606 RFQ USMRP10005005AO-5W-9R1 9.1 606 RFQ USMRP10005005AO-5W-911 910.0 606 RFQ USMRP10005005AO-5W-100 10.0 606 RFQ USMRP10005005AO-5W-102 1000.0 606 RFQ USMRP10005005AO-5W-110 11.0 606 RFQ USMRP10005005AO-5W-112 1100.0 606 RFQ USMRP10005005AO-5W-120 12.0 606 RFQ USMRP10005005AO-5W-122 1200.0 606 RFQ USMRP10005005AO-5W-130 13.0 606 RFQ USMRP10005005AO-5W-132 1300.0 606 RFQ USMRP10005005AO-5W-150 15.0 606 RFQ USMRP10005005AO-5W-152 1500.0 606 RFQ USMRP10005005AO-5W-160 16.0 606 RFQ USMRP10005005AO-5W-162 1600.0 606 RFQ USMRP10005005AO-5W-180 18.0 606 RFQ USMRP10005005AO-5W-182 1800.0 606 RFQ USMRP10005005AO-5W-200 20.0 606 RFQ USMRP10005005AO-5W-202 2000.0 606 RFQ USMRP10005005AO-5W-220 22.0 606 RFQ USMRP10005005AO-5W-222 2200.0 606 RFQ USMRP10005005AO-5W-240 24.0 606 RFQ USMRP10005005AO-5W-242 2400.0 606 RFQ USMRP10005005AO-5W-270 27.0 606 RFQ USMRP10005005AO-5W-272 2700.0 606 RFQ USMRP10005005AO-5W-300 30.0 606 RFQ USMRP10005005AO-5W-302 3000.0 606 RFQ USMRP10005005AO-5W-330 33.0 606 RFQ USMRP10005005AO-5W-332 3300.0 606 RFQ USMRP10005005AO-5W-360 36.0 606 RFQ USMRP10005005AO-5W-362 3600.0 606 RFQ USMRP10005005AO-5W-390 39.0 606 RFQ USMRP10005005AO-5W-392 3900.0 606 RFQ USMRP10005005AO-5W-430 43.0 606 RFQ USMRP10005005AO-5W-432 4300.0 606 RFQ USMRP10005005AO-5W-470 47.0 606 RFQ USMRP10005005AO-5W-472 4700.0 606 RFQ USMRP10005005AO-5W-500 50.0 606 RFQ USMRP10005005AO-5W-502 5000.0 606 RFQ USMRP10005005AO-5W-510 51.0 606 RFQ USMRP10005005AO-5W-512 5100.0 606 RFQ USMRP10005005AO-5W-560 56.0 606 RFQ USMRP10005005AO-5W-562 5600.0 606 RFQ USMRP10005005AO-5W-620 62.0 606 RFQ USMRP10005005AO-5W-622 6200.0 606 RFQ USMRP10005005AO-5W-680 68.0 606 RFQ USMRP10005005AO-5W-682 6800.0 606 RFQ USMRP10005005AO-5W-750 75.0 606 RFQ USMRP10005005AO-5W-752 7500.0 606 RFQ USMRP10005005AO-5W-820 82.0 606 RFQ USMRP10005005AO-5W-822 8200.0 606 RFQ USMRP10005005AO-5W-910 91.0 606 RFQ USMRP10005005AO-5W-912 9100.0 606 RFQ USMRP10005005AO-5W-101 100.0 606 RFQ USMRP10005005AO-5W-103 10000.0 606 RFQ Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

 
 
US MICROWAVES   5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS
Advanced Microwave Components   USMRP10005005AO-5W-1P56GHz
 
 

FEATURES
APPLICATIONS
1.56GHz Al2O3 POWER CHIP RESISTOR
High power dissipation while working up to GHz range frequencies
Low insertion loss
High reliability and ruggedness
Small chip size with reduced stray capacitance per unit area
Low temperature coefficient
Wide operating temperature range
Microwave and RF high power terminations
Resistive microwave power dividers
Wilkinson power dividers
Power attenuators
Microwave power amplifiers
5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz

PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
USMRP10005005AO-5W-1P56GHz, 5W, 1.56GHz, Alumina (Al2O3) flange less power chip resistors are designed to be used in chip and wire hybrid circuits as microwave and RF power resistors, power terminations, Wilkinson power dividers, power attenuators, microwave power amplifiers, etc. Flange less thin film power chip resistors and terminations have low temperature coefficients, low noise and increased long term stability compared to their thick film counterpart (see app note 110). In high power applications, temperature coefficient of resistance and long term stability have to be the best available.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.
All US Microwaves products are manufactured using GOLD CHIP TECHNOLOGY™ a trade mark of Semiconix Corporation.

ELECTRICAL/MECHANICAL CHARACTERISTICS
PARAMETER VALUE UNITS
Resistance range 0.03 - 10000 Ω
Maxim Power 5 W
Maxim Capacitance 2.044 pF
3dB frequency (defined for 50ohm  resistance) 1.56 GHz
Temperature Coefficient -55C to 150C 100 ppm/°C
Tolerances available 1 %
Operating Temperature range -65 to +200 °C
Working voltage (Vw) √(P*R) V
Peak voltage at 25C, 5 sec 1.5×Vw V
Insulation resistance at 25 C 1013 Ω
Rth thermal resistance between the resistive layer and the solder joint 1.45 °C/W
Note: Power dissipation is provided for a temperature difference of 10°C above ambient between substrate and solder joint.
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

GENERAL DIE INFORMATION
Substrate Thickness [mils] Size [mils] Bonding Pads Backside metal
Alumina
(Al2O3)
5.5±0.5 100x50±2 min 4x4 mils, 3um thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard Ti/Pt/Au compatible with Au-Sn, Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders.
All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

1.56GHz Al2O3 POWER CHIP RESISTOR DIE LAYOUT / MECHANICAL SPECIFICATIONS
5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz
1.56GHz Al2O3 POWER CHIP RESISTOR CHIP MOUNT
5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz power chip resistor mount
1.56GHz Al2O3 POWER CHIP RESISTOR ASSEMBLY PROCESS - SHORT APPLICATION NOTE
Flangeless power chip resistors are designed for critical designs where space is at premium. The flangeless power chip resistors can be die attached to the heat sink or to a base plate using AuSn or AuGe preforms. Since the power chip resistors do not have terminals, they have to be attached using gold ribbon via gap welding after the backside is soldered in place. Backside metallization for power chip resistors is Ti/Pt/Au which is also compatible with Sn solder. For the more common SnPb, a Ti/Ni/Au backside metallization should be requested.

POWER CHIP RESISTORS - POWER DERATING DIAGRAM
5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz Power Derating

POWER CHIP RESISTORS S PARAMETERS
5W, 1.56GHz, ALUMINA POWER CHIP RESISTORS USMRP10005005AO-5W-1P56GHz RETURN LOSS S-PARAMETERS

STANDARD PRODUCTS ORDERING INFORMATION
USM P/N WAFFLE PACK R [Ω] MIN. QTY U/P [$]
USMRP10005005AO-5W-500-1% -WP 50 606 0.86

PART NUMBER BUILDER
R [Ω] R multiplier TOLERANCE PACKAGE
Find part # Vmax [V] F@3dB [GHz]

STANDARD EIA-24 VALUES - PRODUCTS ORDERING INFORMATION
USM P/NR [Ω]QTYU/P[$]USM P/NR [Ω]QTYU/P[$]
USMRP10005005AO-5W-1R01.0606RFQUSMRP10005005AO-5W-101100.0606RFQ
USMRP10005005AO-5W-1R11.1606RFQUSMRP10005005AO-5W-111110.0606RFQ
USMRP10005005AO-5W-1R21.2606RFQUSMRP10005005AO-5W-121120.0606RFQ
USMRP10005005AO-5W-1R31.3606RFQUSMRP10005005AO-5W-131130.0606RFQ
USMRP10005005AO-5W-1R51.5606RFQUSMRP10005005AO-5W-151150.0606RFQ
USMRP10005005AO-5W-1R61.6606RFQUSMRP10005005AO-5W-161160.0606RFQ
USMRP10005005AO-5W-1R81.8606RFQUSMRP10005005AO-5W-181180.0606RFQ
USMRP10005005AO-5W-2R02.0606RFQUSMRP10005005AO-5W-201200.0606RFQ
USMRP10005005AO-5W-2R22.2606RFQUSMRP10005005AO-5W-221220.0606RFQ
USMRP10005005AO-5W-2R42.4606RFQUSMRP10005005AO-5W-241240.0606RFQ
USMRP10005005AO-5W-2R72.7606RFQUSMRP10005005AO-5W-271270.0606RFQ
USMRP10005005AO-5W-3R03.0606RFQUSMRP10005005AO-5W-301300.0606RFQ
USMRP10005005AO-5W-3R33.3606RFQUSMRP10005005AO-5W-331330.0606RFQ
USMRP10005005AO-5W-3R63.6606RFQUSMRP10005005AO-5W-361360.0606RFQ
USMRP10005005AO-5W-3R93.9606RFQUSMRP10005005AO-5W-391390.0606RFQ
USMRP10005005AO-5W-4R34.3606RFQUSMRP10005005AO-5W-431430.0606RFQ
USMRP10005005AO-5W-4R74.7606RFQUSMRP10005005AO-5W-471470.0606RFQ
USMRP10005005AO-5W-5R05.0606RFQUSMRP10005005AO-5W-501500.0606RFQ
USMRP10005005AO-5W-5R15.1606RFQUSMRP10005005AO-5W-511510.0606RFQ
USMRP10005005AO-5W-5R65.6606RFQUSMRP10005005AO-5W-561560.0606RFQ
USMRP10005005AO-5W-6R26.2606RFQUSMRP10005005AO-5W-621620.0606RFQ
USMRP10005005AO-5W-6R86.8606RFQUSMRP10005005AO-5W-681680.0606RFQ
USMRP10005005AO-5W-7R57.5606RFQUSMRP10005005AO-5W-751750.0606RFQ
USMRP10005005AO-5W-8R28.2606RFQUSMRP10005005AO-5W-821820.0606RFQ
USMRP10005005AO-5W-9R19.1606RFQUSMRP10005005AO-5W-911910.0606RFQ
USMRP10005005AO-5W-10010.0606RFQUSMRP10005005AO-5W-1021000.0606RFQ
USMRP10005005AO-5W-11011.0606RFQUSMRP10005005AO-5W-1121100.0606RFQ
USMRP10005005AO-5W-12012.0606RFQUSMRP10005005AO-5W-1221200.0606RFQ
USMRP10005005AO-5W-13013.0606RFQUSMRP10005005AO-5W-1321300.0606RFQ
USMRP10005005AO-5W-15015.0606RFQUSMRP10005005AO-5W-1521500.0606RFQ
USMRP10005005AO-5W-16016.0606RFQUSMRP10005005AO-5W-1621600.0606RFQ
USMRP10005005AO-5W-18018.0606RFQUSMRP10005005AO-5W-1821800.0606RFQ
USMRP10005005AO-5W-20020.0606RFQUSMRP10005005AO-5W-2022000.0606RFQ
USMRP10005005AO-5W-22022.0606RFQUSMRP10005005AO-5W-2222200.0606RFQ
USMRP10005005AO-5W-24024.0606RFQUSMRP10005005AO-5W-2422400.0606RFQ
USMRP10005005AO-5W-27027.0606RFQUSMRP10005005AO-5W-2722700.0606RFQ
USMRP10005005AO-5W-30030.0606RFQUSMRP10005005AO-5W-3023000.0606RFQ
USMRP10005005AO-5W-33033.0606RFQUSMRP10005005AO-5W-3323300.0606RFQ
USMRP10005005AO-5W-36036.0606RFQUSMRP10005005AO-5W-3623600.0606RFQ
USMRP10005005AO-5W-39039.0606RFQUSMRP10005005AO-5W-3923900.0606RFQ
USMRP10005005AO-5W-43043.0606RFQUSMRP10005005AO-5W-4324300.0606RFQ
USMRP10005005AO-5W-47047.0606RFQUSMRP10005005AO-5W-4724700.0606RFQ
USMRP10005005AO-5W-50050.0606RFQUSMRP10005005AO-5W-5025000.0606RFQ
USMRP10005005AO-5W-51051.0606RFQUSMRP10005005AO-5W-5125100.0606RFQ
USMRP10005005AO-5W-56056.0606RFQUSMRP10005005AO-5W-5625600.0606RFQ
USMRP10005005AO-5W-62062.0606RFQUSMRP10005005AO-5W-6226200.0606RFQ
USMRP10005005AO-5W-68068.0606RFQUSMRP10005005AO-5W-6826800.0606RFQ
USMRP10005005AO-5W-75075.0606RFQUSMRP10005005AO-5W-7527500.0606RFQ
USMRP10005005AO-5W-82082.0606RFQUSMRP10005005AO-5W-8228200.0606RFQ
USMRP10005005AO-5W-91091.0606RFQUSMRP10005005AO-5W-9129100.0606RFQ
USMRP10005005AO-5W-101100.0606RFQUSMRP10005005AO-5W-10310000.0606RFQ

List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.


Last updated: October 18, 2010
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2024 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.