| Z50 Lab Kit - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission line on aluminium oxide |
| US MICROWAVES | Z50 50 ohms Microstrip Transmission Lines | |
| Advanced Microwave Components | Engineering LAB KIT | |
|
FEATURES
|
APPLICATIONS
|
50 OHM MICROSTRIP TRANSMISSION LINE
|
|||||||
|
|
 |
| PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE |
|
USM Z50 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different alumina ceramic thicknesses and different widths and lengths. Transmission lines in Z50C series are terminated within <2 mils from edge of ceramic to avoid gold pile up caused by dicing operation. Gold pile up may interfire with wire bonding in some applications. Z50C series of 50 ohms transmission lines is also available in custom sized at no additional cost. US Microwaves offers a standard lab kit for the 50 ohms transmission lines. The kit contains all six different sizes in quantities listed in Table 1. -The U/P for each kit of 6 different sizes starts from $250.00. No RFQ i.e. request for quote is necessary. Registered Customers may place orders using "Order" link or by Fax:(408)986-8027. For other inquiries, please e-mail using Contacts page, or contact US Microwaves technical sales at 408-986-8026. |
| TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING |
| All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1ohm/sq to 10,000ohms/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. |
| GENERAL DIE INFORMATION | ||||
| Substrate | Thickness [mils] | Size [mils] | Top Conductor | Backside metal |
| Al2O3 - Aluminium Oxide | TT ±0.5 | L x W ±2 | Standard 3µm thick, 99.99% electroplated gold with a TiW barrier | Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. |
| All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). | ||||
| STANDARD PRODUCTS ORDERING INFORMATION |
| ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. |
| GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met. |
| U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. |
| Home | Product Tree | Tech. Support | Request Quote | Inventory | Place Order | Contact sales |
| Last updated: April 07, 2008 |
| US MICROWAVES 2968 Scott Blvd. Santa Clara, CA 95054-3322 USA Tel:(408)986-8026 Fax:(408)986-8027 |
| ©1990-2008 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission. |